Why you need “PYRAMID AIR PROTECT”
and How it Works?
The best solution to stop Coronavirus in the Air and AREA is to REMOVE them!
With our knowledge, experience and nonstop development, we create the innovation to help each of us fight outbreaks from spreading the Virus
Our global effort day by day planting a good seed to bring a great result and our daily life will soon return to a normal situation
Feel free to contact us for UV and Ozone Air Purifiers “Pyramid Air Protect®”, We are running to help you and your family safer from Bacterias, Viruses, i.e. Influenza & Coronaviruses.
Why did we choose UV-c ozone lamps instead of the more powerful Corona ozone generator to produce ozone?
It is important to understand our choice, because our customers often compare the ozone production of our Pyramid Air Protect with Corona ozone generators, this comparison may not at first view be to our advantage.
If you take the time to read this explanation, you will understand that this choice is the right one and very important for the end user.
Ozone is an unstable gas, it is necessarily produced on site (in situ).
For an industrial production in large quantities, the Corona ozone generator is essential, Yes, but it does have a size constraint which is difficult to implement with a compact and mobile device, and in addition to being expensive and very energy consuming, this constraint is applicable to all manufacturers, including the professional ones.
Unlike the UV-c lamp, the Corona Discharge Ozone Generator requires a 95% pure and dry oxygen, in theory it also works with humid ambient air (Oxygen 21%, nitrogen 78.08%); other gases less than 1%) but it is certain that it will no longer produce ozone after a few weeks, due to a phenomenon known by all manufacturers, but hidden or minimized by some less scrupulous by sentences that do not clearly specify that pure and dry oxygen must be used.
- The use of dry air is recommended.
- Caution must be used in an atmosphere with low relative humidity to avoid nitric acid being generated by the ozone generator during ozone production.
- In the manual, it says “maximum air humidity 60%.”
To be precise, in a more or less long term if the humid ambient air is used, the Corona generator will either malfunction or will no longer produce ozone, this is why serious companies that have been working in the industrial environment for years do not offer a cheap mobile Corona ozone generator powered by ambient air.
To better understand the phenomenon.
When using the ambient air, humidity is present, when discharges occur, the humidity will generate the water vapor and nitric acid is formed from the nitrogen in the air.
Nitric acid and water will precipitate on the surface of the dielectric and cause it to no longer be effective for the production of ozone, this is inevitable.
This is a serious matter because the gradual stoppage of ozone production is difficult for the user to detect if he is not equipped with an ozone detector.
It is also important to understand, that for Corona generators the indicated production is always with pure dry oxygen from an oxygen tank (consumable) or from an oxygen generator – PSA (produces 95% of oxygen from the ambient air, noisy, expensive with a significantly higher power consumption).
As the ambient air contains only 21% oxygen, if a Corona ozone generator is operated with ambient air, the announced production is reduced by 2 to 3 times from the start to eventually no longer produce ozone.
This phenomenon is not encountered with UV-C lamps, the ozone production is less important, but stable over 8000 to 12’000 hours = 1 year and 24/24.
The lamp provides UV-C treatment of the air without any additional costs or power consumption, an advantage that offsets the lower ozone production in terms of treatment quality.
The choice of UV-c ozone lamps is the right one for reliable use over time.
Why do we refuse to produce portable UV-C scanners, "robots", trolleys with UV-C lamps, Even if the development of this type of equipment would take not more than 2 days for our R&D team ? - Read More
The material is simple: UV-C lamp(s), ballast(s), half-shell, stainless steel deflector, the same material we use every day for our UV-C sterilizers, intended for water treatment.
Even if we used a specific lamp, the design remains the same.
This type of device (portable UV-C, “robots”, trolleys with UV-C lamps) has been around for years, without a promising market.
In many countries the method is similar, since the beginning of the pandemic, some serious companies (not only opportunistic foreign companies) well established in the country are taking the opportunity to update this equipment, they try to demonstrate the effectiveness by independent laboratory reports based on standards “adapted” to the equipment … there is no doubt about the result of the tests, it would be much more interesting to know the protocol applied, but there is no communication.
3 reasons for us not to market this type of equipment; efficiency, fragility, and danger for the operator. - Read More
How can we be sure that a trolley with UV-C lamps placed in the middle of a room can treat a surface located several meters away or a surface that is not directly exposed to UV-C radiation? In our opinion, this is impossible, or else we do not know this type of magic lamp.
For decades now, UV-C drinking water treatment has been implemented in the best stations in the world, with a principle applied by all, which consists in bringing the water flow as close as possible to the UV-C lamps (within a few centimeters). This principle is also valid for air or solid surfaces.
How can we be sure with a portable scanner that the operator will keep the right distance from the surface, that there is enough time for the contact time to be effective?
In laboratory tests or demonstrations this is possible, but what about at the workplace? The operator who is timed to carry out the tasks will quickly miss out on the speed of passage, the distance to be respected and therefore the efficiency, in the event of a control that will be called into question?
All users of UV-C lamps will make the same remark, how to avoid breaking the lamps?
Simply changing lamps in a sterilizer is a difficult and meticulous task, the slightest shock will damage the lamp.
Breaking the lamps is something that will often happen, because moving the trolley from room to room, even if the lamps are protected, or passing the portable scanner very close to surfaces, are situations where the lamps will be exposed to shock.
Our manufacturing teams handle UV-C lamps on a daily basis, we know their fragility, so installing UV-C lamps on a trolley, or worse in a stainless-steel half-shell, is inconceivable to us.
We manufacture both types of product, UV-C sterilizer and ozonator, we are particularly aware of the danger of each method.
In order to treat all surfaces, the trolley must be moved, which requires the operator to be present, just as with a portable scanner, this treatment must be carried out during working hours with a potential crowd, contrary to our Pyramid, which is put in ozone boost only at hours when there is no activity (usually at night).
Just like the skin, the eyes are vulnerable to UV-C, a few seconds can damage the surface and the mucous membrane (conjunctiva) of the eye, it is particularly painful the following night.
Kills Air Borne, Bacteria 24/7
Do I need UV + OZONE air purifier?
Yes – Why don’t you want to get good and fresh air in your area?
With Pyramid Air Protect®, it is responsible for eliminating bacteria. Mold and virus That are harmful to the disease
Do Pyramid Air Protect Air Purifiers really work?
Absolutely- by UV + OZONE + Plasma combine technology, Pyramid Air Protect can eliminate air infections like germs, bacteria, mold and viruses, and not only in the air but include on the surface in your room as well
Where is the best place to put my Pyramid Air Protect®?
- In fact, it can be installed at any place you want to. Due to having a Modern design, You can also use it as furniture.
- The perfect spot should be the center of the room. So the Pyramid Air Protect will be able to suck air through the machine and release ozone easily around the area.
SUITABLE FOR USE IN
- RETIREMENT HOMES
- WAITING ROOMS
- CHILD CARE
- FITNESS CENTERS
Ozone efficacy for the control of airborne viruses: Bacteriophage and norovirus models
Marie-Eve Dubuis,Nathan Dumont-Leblond,Camille Laliberté,Marc Veillette,Nathalie Turgeon,Julie Jean,Caroline Duchaine Link Here
This treatment could also be tested with bacteria resistant to antibiotics, including Clostridium difficile, methicillin-resistant Staphylococcus aureus and vancomycin-resistant enterococci, which are serious threats to hospitalized patients. Lastly, low ozone concentrations could be used for air treatment inside hospital rooms ventilated naturally, providing an additional tool for hospitals that do not possess HVAC plenums..
A PLAUSIBLE “PENNY” COSTING EFFECTIVE TREATMENT FOR CORONA VIRUS – OZONE THERAPY
Robert Jay Rowen, MD1,* and Howard Robins, DPM2
Many viruses require reduced sulfhydryl groups for cell fusion and entry. Corona viruses, including SARS-CoV-2 (the cause of the condition now named coronavirus disease 2019 or COVID-19), are rich in cysteine, which residues must be intact for viral activity. Sulfhydryl groups are vulnerable to oxidation.
Ozone therapy, a very inexpensive and safe modality may safely exploit this critical vulnerability in many viruses, inclusive of SARS-CoV-2.
SARS and Ozone Therapy: Theoretical Considerations
by Gérard V. Sunnen, Link Here
Ozone, because of its special biological properties, has theoretical and practical attributes to make it a viable candidate as a SARS virus inactivator through a variety of physicochemical and immunological mechanisms.
Development of a Practical Method for Using Ozone Gas as a Virus Decontaminating Agent
by James B. Hudson ,Manju Sharma &Selvarani Vimalanathan, Link Here
As a result of these studies, we believe that the apparatus we have developed, based on the use of ozone gas and high humidity, has many potential applications wherever efficient decontamination of rooms is required.